Document Title

Closing Procedures

If you choose not to make optimum use of your spa and prefer closing it for the winter, we suggest that you continue to maintain it until closing time and have a complete test of your water done in-store. Do not turn off the filtering system prior to winterizing the pool in order to protect equipment against freezing and to maintain clear water.

PROCEDURES

Turn off the water heater thermostat
Drain spa using the pump on low speed
Remove cartridges from the skimmer
Connect a garden hose to the drain valve and open the drain valve completely
When the water level is half-way up the bottom drain, stop the motor and remove the rest of the water using a plastic pail
Store the jet pump indoors
Disconnect the light
Remove all jets inserts
Drain the pipes using a "Shop-Vac" type vacuum cleaner
Make sure that the valves located on either end of the pipes remain open
Clean acrylic surfaces using ourTRÉVI RÉSINE-NET
Pour TRÉVI ANTIGEL non-toxic antifreeze in the pipes to overflowing
Install the spa cover
Cover with plywood
Make sure everything is secure enough to withstand winter conditions
Cover the spa with a polyethylene or vinyl sheet
If your cartridges need replacing, nite the model number before discarding them

IMPORTANT NOTE:
The spa cover can sustain a maximum weight of 100 lbs. You will need to remove the snow regularly in winter.

Technical Tips Trevilege Card Safety Tips Contact us Trevi's Profil Site Map